Installing your inground pool is really not that difficult!
We realize installing your own pool may seem a little intimidating, but we promise you can do it!
We understand this may be your first time entertaining this type of project. So we make it easy for you by sending “ALL”necessary components needed to complete your installation. This way there is no guessing and no wasted trips to the Home Depot! (*Pool Bottom material, and pvc pipe not included.)
To the best of knowledge we have a 99% success rate of our customers installing there own pools. And you can too!
We invite you to browse thru some photos of a typical in-ground pool installation. This pool was installed in the summer of 2007. Photos donated by Paul of Tallahassee Florida and are for reference only. (click images for enlargements)
Sample Drawing![]() |
Sample Calculation![]() |
“Engineering plans currently not available”
Level & Knife | Drill Bits |
Adjustable Wrench | Screwdrivers |
Socket Set | 50″ Tape Measure |
Extension Cords | String Line |
Shovels (Flat and Round) | Trowel |
2 3/4 Hole Saw | Hacksaw |
Drill | Channel Lock Plyers |
Tamper | Broom |
Slegde Hammer | Hose |
Rake | Shop Vac |
Caulk Gun | Pick Axe |
Duct tape | Backhoe Operator |
Even if you were to contract all phases of your install out to different contractors, you would eliminate the middleman and enjoy savings of up to $10,000.00 to $15,000.00 off retail.